About this Product

• Meter Display: LCD
• Automatic Power: 90 seconds
• Auto power on with strip insertion
• Auto off when strip is removed (5 seconds)
• Auto off in 2 minutes if meter not used
• Power Supply: (1) 3V lithium battery (CR2032)
• Battery life: Approximately 2,000 readings
• Measurement Time: 7 seconds

How to use it

The blood glucose test strip should be used with Blood Glucose meters , and is intended for blood glucose monitoring by people with diabetes.  test strips only need 1μL fresh capillary blood for one testing. Blood glucose concentration result will be showed in 7 seconds after you apply a blood sample into the test zone.

Intended use

The blood glucose test strips are intended to use for the quantitative measurement of glucose in fresh capillary whole blood samples drawn from the fingertips. The blood glucose test strips must be used with the blood glucose Meter . Testing is done outside the body. They are designed for self-testing to monitor the effectiveness of diabetes control. The device should not be used for screening or diagnosis of diabetes or for testing neonates.

Warning:

• System should not be used for screening or diagnosis of diabetes or for testing neonates.
• For in vitro diagnostic use only.
• Do not alter your treatment based on the test result of these systems without instructions from your doctor.
• Read the instruction manual for your meter before use. If your have any question, contact your distributors.

How to store strips?

• Do not use strips if the vial is opened or damaged.
• Write the open date on the vial label when you first open it. You should discard your strips by 3 months from first opening the vial.
• Store strip vial in a cool, dry place. Keep away from light and heat.
• Do not store your strips in the refrigerator.
• Store your strips in their original vial only.
• Do not transfer test strips to any other container.
• Immediately replace the vial cap after you remove a test strip.